Tozenflex TOZEN
กรุณาติดต่อเจ้าหน้าที่
- หมวดหมู่ : ฟิตติ้ง (สแตนเลส, เหล็ก) สายอ่อน แสตนเลส, เหล็ก และ ท่อยาง TOZEN
- ยี่ห้อสินค้า : TOZEN
รายละเอียดสินค้า
No. | Parts | Standard Materials |
1 | Flange | FCD, SS400 |
2 | Reinforcing Ring | Carbon Steel (SWRH) |
3 | Inner Rubber | Synthetic Rubber (EPDM) |
4 | Outer Rubber | Synthetic Rubber (EPDM) |
5 | Reinforcing Cord | Synthetic Fiber |
6 | Filter | Special High-polymer Rubber |
- Flanges JIS10K, ANSI 150 and PN16 are standard, except ANSI 150 for the size 20&32 mm are not produced.
- Flange material can be changed to SUS 304 and SUS 316.
- The products are not applicable to oil. However, it may be possible by changing the rubber material. Please consult us.
Nominal Dia. (A) | Dimension (mm) | Allowable Movement (mm) | Installation Tolerance (mm) | ||||||||
L | A | d | T.M. | A.E. | A.C. | A.M. (°) | T.M. | A.E. | A.C. | A.M. (°) | |
20 | 140 | 58 | 25 | 10 | 5 | 10 | 15 | 4 | 3 | 6 | 7.5 |
25 | 140 | 58 | 25 | 10 | 5 | 10 | 15 | 4 | 3 | 6 | 7.5 |
32 | 150 | 80 | 40 | 20 | 10 | 20 | 15 | 8 | 3 | 6 | 7.5 |
40 | 150 | 80 | 40 | 20 | 10 | 20 | 15 | 8 | 3 | 6 | 7.5 |
50 | 150 | 96 | 50 | 20 | 10 | 20 | 15 | 8 | 3 | 6 | 7.5 |
65 | 150 | 115 | 65 | 20 | 10 | 20 | 15 | 8 | 3 | 6 | 7.5 |
80 | 150 | 125 | 75 | 20 | 10 | 20 | 15 | 8 | 3 | 6 | 7.5 |
100 | 150 | 152 | 100 | 20 | 15 | 20 | 15 | 8 | 3 | 6 | 7.5 |
125 | 150 | 182 | 125 | 20 | 15 | 20 | 15 | 8 | 3 | 6 | 7.5 |
150 | 150 | 212 | 150 | 20 | 8 | 15 | 15 | 8 | 3 | 6 | 7.5 |
200 | 150 | 264 | 200 | 20 | 8 | 15 | 15 | 10 | 3 | 6 | 7.5 |
250 | 200 | 324 | 250 | 25 | 15 | 20 | 15 | 10 | 3 | 6 | 7.5 |
300 | 200 | 373 | 300 | 25 | 15 | 20 | 15 | 10 | 3 | 6 | 7.5 |
350 | 200 | 417 | 350 | 25 | 15 | 20 | 15 | 10 | 3 | 6 | 7.5 |
400 | 200 | 478 | 400 | 25 | 15 | 20 | 15 | 10 | 3 | 6 | 7.5 |
T.M. = Transverse Movement
A.E. = Axial Elongation
A.C. = Axial Compression
A.M. = Angular Movement
**Although allowable movements are given, do not allow them for axial elongation when installing the joints for suction purpose. **
- Use the products within the given allowable movements.
- Tolerances for installation are included in the allowable movements (Allowable movements = Tolerances for installation + Operating movements)
- Please note that information in the above table are for single movement only. In case of complex movements, some correction is required.
"หากท่านลูกค้าต้องการสินค้านอกเหนือจากในรายการ สามารถสั่งซื้อได้โดยตรงที่"
เบอร์: 02-9187343
Email: T.P.online01@gmail.com
Line: @TPinter
"รายละเอียดสินค้าอาจมีการเปลี่ยนแปลงโดยไม่แจ้งให้ทราบล่วงหน้า"