Drill, Drill Bit, Drill Repair Kit, Bench Drill Press, Bench Drill Press Repair Kit, Riveter, Blind Rivet, Reamer, Chisel, End Mill, Center Drill, Hole saw
Drill Press Spring for DP-5000G, SE-300E, SE-300G
Drill Press Spring
for DP-5000G, SE-300E, SE-300G
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Rivet Nut
Rivet Nut
M5*0.8
M6*1
M8*1.25
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Hexagon Split Point Drill Bit Phoenix
Hexagon Split Point Drill Bit Phoenix
2 mm.
2.2 mm.
2.5 mm.
3 mm.
3.2 mm.
3.5 mm.
4 mm.
4.2 mm.
4.5 mm.
5 mm.
5.5 mm.
6 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T...
Key Drill Chuck ROHM
Key Drill Chuck ROHM
Description #Model
For Drill
10T*4 mm. #S-1
1/4"
11T*6 mm. #S-14
3/8"
12T*6 mm. #S-2
3/8", 1/2"
12T*8 mm. #S-3
1/2", 5/8"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information c...
4 in 1 Heavy Duty Riveter KUGEL
4 in 1 Heavy Duty Riveter KUGEL
3.2 , 4 , 4.8 , 6.4 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Nut Riveter Set KUGEL
Nut Riveter Set KUGEL
M4 , M5, M6, M8 , M10
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Hammer Drill 1/2" Makita M8103B
Hammer Drill 1/2" Makita M8103B
Size 13mm.(1/2") power 430 W
Capacity Concrete: 13 mm., Steel: 13 mm., Wood: 18 mm.
Use for drill wood, metal, stone, concrete and plastic.
Power source for MAKITA M8103B
Must be use with Voltage 240 volts, and Use with Single-phase electric power.
This product is cover by Double Insulation, Can use...
Bench Drill Press 850W 1" REXON DP-430F MT3
Bench Drill Press 850W 1" REXON DP-430F MT3
Specification
Motor : 850 W
Drilling size : 19 mm.
12 Speed
Drilling power : 25 mm.
Tapered size : MT3xJT3
Stoke range : 82.5 mm.
Pole diameter Ø : 80 mm.
Plate size : 364x364 mm.
Base size : 518x279 mm.
Height : 1647 mm.
"If there are any additional...
Switch for Small Bench Drill Press KA3
Switch for Small Bench Drill Press KA3
10A AC 250V/380V
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Switch for Large Bench Drill Press DA7B
Switch for Large Bench Drill Press DA7B
10A AC 250V/380V
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Drill Machine Spring
Drill Machine Spring
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Drill Machine Spring T-16A and T-16A
Drill Machine Spring
For T-16A and T-16A
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Drill Machine Spring DP-330A
Drill Machine Spring
For DP-330A
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Drill Machine Spring DP-250A
Drill Machine Spring
For DP-250A
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Blind Rivet Warrior
Blind Rivet Warrior
Made from high quality Aluminium
Thin egde dome head
Many available sizes
Strong and Anti-rust
Use with Hand Riveters
Code
Diameter
Length (mm.)
Length (Inch)
4-1
3.2 mm. (1/8")
4.8
3/16"
4-2
3.2 mm. (1/8")
6.4
1/4"
4-3
3.2 mm. (1/8")
8.0
5/16"
4-4
3.2 mm. (1/8")
9.6
3/8...
Accordion Riveter TAIYO HR-50
Accordion Riveter TAIYO HR-50
Material
Rivet / Mandrel
Rivet Dia.
2.4 mm. (3/32")
3.2 mm. (1/8")
4.0 mm. (6/32")
4.8 mm. (3/16")
Aluminium/Alumi
x
x
x
〇
Aluminium/Steel
x
x
x
〇
Steel/Steel
x
x
x
〇
Stainless steel
x
x
x
x
"If there are any additional requesting produc...
Hand Riveter WINTON
Hand Riveter WINTON
For rivets: 2.4 mm. , 3.2 mm. , 4.0 mm. , 4.8 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Hand Riveter Lobster HR-002A
Hand Riveter Lobster HR-002A
It is a hand Riveter with general configuration.
Aluminum die cast frame and drop-forged chrome-vanadium steel lever handle
Wide, self-opening spring for regripping ease
Automatic mandrel ejection
Comes with four nosepieces to set rivets up to 3/16"
International design
Use Range : Փ 2.4...
Medium Duty Hand Riveter STANLEY STHT-69646-8
Medium Duty Hand Riveter STANLEY STHT-69646-8
All steel body with non-slip grip and wrench for changing nosepieces
Spring loaded handle ejects rivets stem
Versatile tool for joining sheet metal, fabric, leather, plastic parts, etc
1/8", 5/32", 3/16"
"If there are any additional requesting products, you can contact" Tel: 02-918-734...
Heavy Duty Hand Riveter STANLEY Pro STHT-69800-8
Heavy Duty Hand Riveter STANLEY Pro STHT-69800-8
All steel body with non-slip grip and wrench for changing nosepieces
Spring loaded handle ejects rivets stem
Versatile tool for joining sheet metal, fabric, leather, plastic parts, etc
3/16" (5 mm.)
5/32" (4 mm.)
1/8" (3 mm.)
3/32" (2 mm.)
"If there are any additional requesting p...
Pneumatic Riveter 3/16" PUMA AT-6315
Pneumatic Riveter 3/16" PUMA AT-6315
Capacity
3/16"
Stoke length
9/16" (14mm)
Air consumption
0.03 CFM (0.85 Litre/min.)
Pressure
90 psi , 6.5 kg/cm2
Weight
1.5 KG.
Overall length
273 mm.
Air inlet
1/4"
Suggested air compressor : 1 HP
"If there are any additional requesting product...
Bench Drill Press 5/8" REXON DP-330A
Bench Drill Press 5/8" REXON DP-330A
Specification
Bench drill size
5/8"
Weight
63 KG.
Drilling bit
16 mm.
Pole size
85 mm.
Plate size
274x274 mm.
Tapered size
MT2
Speed
12 Speed
Motor
600 W. / 220 V.
Height
1,000 mm.
Base size
463x274 mm.
"If there are any addition...
Bench Drill Press 850W 5/8" REXON DP-430F MT2
Bench Drill Press 850W 5/8" REXON DP-430F with motor
Specification
Weight
78 KG.
Drilling bit
16 mm.
Pole size
85 mm.
Plate size
364x364 mm.
Tapered size
MT2
Speed
12 Speed
Motor
850 W. / 220 V.
Height
1,648 mm.
Base size
530x272 mm.
"If there are any additional requestin...
Bench Drill Press 250W 1/2" TIGER T-13
Bench Drill Press 250W 1/2" TIGER T-13
Specification
Model : TDP-13
Capacity : 13 mm. (1/2") with motor
Power
250 W.
Drilling depth
50 mm.
Plate size
160x160 mm.
Base size
285x260 mm.
Pole size
50 mm.
Height
570 mm.
"If there are any additional requesting products, you can contac...
Bench Drill Press 375W 1/2" TIGER T-13H
Bench Drill Press 375W 1/2" TIGER T-13H
Specification
With motor
Power
375 W.
Drilling bit
13 mm.
Speed
5 Speed
Drilling depth
70 mm.
Base Size
330x210 mm.
Plate Size
196x200 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@...
Bench Drill Press 550W 5/8" TIGER T-16A
Bench Drill Press 550W 5/8" TIGER T-16A
Specification
Model : TDP-16A
Capacity : 16 mm (5/8")
Power
550 W.
Drilling depth
80 mm.
Plate Size
245x245 mm.
Base Size
395x290 mm.
Height
780 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email...
Bench Drill Press 550W 5/8" TIGER T-16B
Bench Drill Press 550W 5/8" TIGER T-16B
Specification
Model : TDP-16B
Capacity : 16 mm (5/8")
Power
550 W.
Drilling depth
80 mm.
Plate Size
285x285 mm.
Base Size
435x250 mm.
Height
820 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P....
Drill Stand HIKARI DS-400
Drill Stand HIKARI DS-400
Height: 400 mm.
Drilling Depth: 60 mm.
Diameter: 43 mm.
Materials: Metal and Plastic
Weight: 1.7 kg.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information...
Concrete Hole Saw KUGEL
โฮลซอเจาะคอนกรีต KUGEL
35 mm.
40 mm.
50 mm.
65 mm.
75 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
SDS Hole Saw KUGEL
โฮลซอเจาะคอนกรีต หัวเพชร KUGEL
25 * 165 mm.
38 * 165 mm.
50 * 165 mm.
63 * 165 mm.
76 * 165 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Concrete Hole Saw MEXCO
Concrete Hole Saw MEXCO
32 * 150 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Stroke Pneumatic Hammer UNIOR 1514
Model
Specification
1514 - 170
Length
170 mm.
Stroke Length
67 mm.
Round Shank Size
10 mm.
Impact Rate
3,000 RPM
Pressure
6.2 Bar
Air consumption
250 L/min
Air Inlet
1/4"
Internal Hose Size
8 mm.
Coulper
20 PM
1514 - 225
Length
225 mm.
Stroke Length
92 mm.
Round Shank S...
Chisel META
Size
1"*12"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Concrete Punch META
Size
5/32"*12"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Key Drill Chuck (10T) OKURA K
Key Drill Chuck (10T) OKURA K
Model , Description
For Drill
#K-32 10T*6.3 mm.
1/2"
#KK 10T*7 mm.
1/2"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Key Drill Chuck (11T) OKURA K
Key Drill Chuck (11T) OKURA K
Model , Description
For drill
#K-11 11T*4 mm.
1/4"
#K-3 11T*8 mm.
5/8"
#K-7 11T*5.5 mm.
3/8"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed witho...
Key Drill Chuck (12T) OKURA CK
Key Drill Chuck (12T) OKURA CK
#CK-3 12T*4 mm.
1/4"
#CK-4 12T*5.5 mm.
3/8"
#CK-5 12T*6.5 mm.
1/2"
#CK-6 12T*8 mm.
5/8"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be...
Key Drill Chuck MEXCO TW
Key Drill Chuck MEXCO TW
Description
For drill
12T*8 mm.
5/8"
12T*9.5 mm.
3/4"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Cordless Drill Driver 7 mm. BOSCH GSR 120-L
Technical Data
Cordless Drill / Driver
GSR 120-LI
Artical Number
3 601 JF7 0..
Rated Voltage
V
12
No-Load Speed
1st Gear
min-1
0 - 380
No-Load Speed
2nd Gear
min-1
0 - 1,300
Max. Torque for hard / soft screwdriving application according to ISO 5393
Nm
30 / 13*
Max. Drilling Dia.
St...
Rotary Drill 1/4" BOSCH GBM 320
Technical Data
Rotary Drill
GBM 320
Artical Number
3 601 AA4 5..
Rated Power Input
Watt
320
Output Power
Watt
160
No-Load Speed
min-1
0 - 4,200
Rated Speed
min-1
0 - 1,500
Speed Control
●
Right / Left Rotation
●
Chuck Clamping Range
mm.
0.5 - 6.5
Max. Drilling Dia.
Steel...
Rotary Drill 1/4" BOSCH GBM 6
Technical Data
Rotary Drill
GBM 6 Professional
Article Number
3 601 D72 0..
Rated Power Input
W
350
Output Power
W
136
No-Load Speed
min-1
4,000
Rated Speed
min-1
3,116
Rated Torque
Nm
12.3
Spindle Collar Dia.
mm.
43
Speed Control
-
Right / Left Rotation
-...
Impact Drill 3/8" BOSCH GSB 10 RE
Technical Data
Impact Drill
10 RE
Article Number
3 601 ...
B16 1..
Rated Power Input
W
500
Power Output
W
250
No-Load Speed
min-1
0-2,600
Max. Speed Under Load
min-1
1610
Impact Rate
min-1
25,700
Rated Torque
Nm
1.5
Speed Preselection
-
Right / Left Rotation
●
Spindle...
Impact Drill 1/2" BOSCH GSB 16 RE
Technical Data
Impact Drill
16 RE
Artical Number
3 601 ...
ฺB18 1..
B18 6..
Rated Power Input
W
701
Power Output
W
351
No-Load Speed
min-1
0 - 3,000
Max. Speed Under Load
min-1
1,640
Impact Rate
min-1
26,720
Rated Torque
Nm
2.0
Speed Preselection
●
Right /...
Impact Drill 1/2" BOSCH GSB 20-2
Impact Drill 1/2" BOSCH GSB 20-2
Impact Drill
20-2
Order Number
0 601 ...
184 0 ..
Rated Power
[W]
701*
Output Power
[W]
380*
Rated Speed
Right Rotation
1st Gear
[RPM]
650
2nd Gear
[RPM]
2,000
Left Rotation
1st Gear
[RPM]
-
2nd Gear
[RPM]
-
Impact R...
Rotary Hammer Drill 26 mm. BOSCH GBH 2-26 DFR
Technical Data
Rotary Hammer
2-26 DFR
Artical Number
0 611 ...
254 7..
Speed Control
●
Stop Rotation
●
Right / Left Rotation
●
Quick Change Chuck
●
Rated Power Input
W
800
Impact frequency at rated speed
min-1
0 - 4,000...
Rotary Hammer Drill 32 mm. BOSCH GBH 4-32 DFR
Technical Data
Rotary Hammer
GBH 4-32 DFR
Artical Number
3 611 C32 0..
3 611 C32 1..
Rated Power Input
W
900
Rated Speed
min-1
0-760
Impact Rate
min-1
0-3,600
Impact energy per stroke according to EPTA-Procedure 05/2009
J
5.0
Chisel Positions
12
Tool Holder
SDS-plus
Lubrication
Centra...
High Speed Drill 1/4" Makita 6501
Technical Specifications
Continuous Rating Input
230 W
Capacity Steel
6.5 mm (1/4")
Capacity Wood
9 mm (11/32")
No Load Speed (RPM)
4,500
Overall Length
206 mm (8-1/8")
Net Weight
0.9 KG (2.0 lbs)
Double Insulating
✓
Carbon brush No.
70
"If there are any additional requesting produc...
Electric Hand Drill 3/8" Makita 6413
Technical Specifications
Continuous Rating Input
450 W
Capacity Steel
10 mm (3/8")
Capacity Wood
25 mm (1")
No Load Speed (RPM)
0 - 3,400
Dimensions (LxWxH)
234mmx64mmx183mm (9-1/4"x2-1/2"x7-1/4")
Net Weight
1.3 KG (2.9 lbs)
Double Insulation
✓
Variable Speed
✓
Reversing
✓
Keyless Chuck...
Hammer Drill 5/8" Makita HP1630
Technical Specifications
Continuous Rating Input
710 W
Capacity Concrete
16 mm (5/8")
Capacity Steel
13 mm (1/2")
Capacity Wood
30 mm (1-3/16")
Impacts per minute (IPM)
0 - 48,000
No Load Speed (RPM)
0 - 3,200
Dimensions (LxWxH)
296mmx75mmx204mm (11-5/8"x2-15/16"x8")
Net Weight
2.1 KG (4.6 lbs)...
Hammer Drill 5/8" Makita 8416
Technical Specifications
Continous Rating Input
570 W
Capacity Concrete
16 mm (5/8")
Capacity Steel
13 mm (1/2")
Impacts per minute (IPM)
21,000
No Load Speed (RPM)
1,400
Overall Length
351 mm (13-3/4")
Net Weight
2.7 KG (6.0 lbs)
Carrying Case
✓
Carbon Brush No.
55
"If there...
2-Speed Hammer Drill 3/4" Makita HP2050
Technical Specifications
Continuous Rating Input
720 W
Capacity Concrete
20 mm (3/4")
Capacity_steel Hi
8 mm (5/16")
Capacity_steel Lo
13 mm (1/2")
Capacity_wood Hi
25 mm (1")
Capacity_wood Lo
40 mm (1-9/16")
Impacts per minute Hi (IPM)
0 - 58,000
Impacts per minute Lo (IPM)
0 - 24,000
No load...
Rotary Hammer Drill 24 mm. Makita HR2470F
Technical Specifications
Continuous Rating Input
780 W
Capacity Concrete
24 mm (15/16")
Capacity Steel
13 mm (1/2")
Capacity Wood
32 mm (1-1/4")
Impacts per minute (IPM)
0 - 4,500
No Load Speed (RPM)
0 - 1,100
Dimensions (LxWxH)
370mmx84mmx214mm (14-1/2"x3-5/16"x8-3/8")
Net Weight
2.9 KG (6.4 lbs)...
High Speed Drill 1/4" Maktec MT653
Technical Specification
Continuous Rating Input
230 W
Capacity Steel
6.5 mm (1/4")
Capacity Wood
9 mm (11/32")
No Load Speed (RPM)
0 - 4,500
Dimensions (LxWxH)
202x64x165 (8x2-1/2x6-1/2) mm
Net Weight
1 KG (2.2 lbs)
Power Supply Cord
2.0 m (6.6 ft)
Double Insulation
✓
Variable Speed
✓
Rev...
Electric Hand Drill 3/8" Makita M6001B
Technical Specifications
Continuous Rating Input
450 W
Capacity Steel
10 mm. (3/8")
Capacity Wood
25 mm. (1")
No Load Speed (RPM)
0 - 3,000
Dimensions (LxWxH)
229x64x175 (9x2-1/2x6-7/8) mm.
Net Weight
1.3 KG (2.8 lbs)
Power Supply Cord
2.0 m (6.6 ft)
"If there are any additional requestin...
Drill 1/4" STANLEY SDR3006
Specifications
Power Input (W)
3,000
No Load Speed (rpm)
0 - 4,500
Chuck Capacity (mm)
6.5
Max. Drilling Capacity (wood) (mm)
15
Max. Drilling Capacity (metal) (mm)
6.5
Cord length (m)
2
Max. Drilling Capacity (Steel) (mm)
6.5
"If there are any additional requesting products, you can cont...
Air Drill 1/2" PUMA AT-4041
Specification
Drill Size
1/2"
Speed
400 RPM
Length
180 mm.
Air consumption
8 CFM (226 Litre/Minute)
Pressure
90 PSI , 6.5 kg/cm2
Weight
1.82 KG.
Air Hose
1/4"
Air Hose Size
3/8"
Recommended air pump 2 HP and above
"If there are any additional requesting products, you can contac...
Bull-Point Chisel BOSCO
Bull-Point Chisel BOSCO
21 * 320 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Flat Chisel BOSCO
Flat Chisel BOSCO
17 * 280 mm.
Flat Chisel BOSCO
20 * 400 mm.
Flat Chisel BOSCO
21 * 320 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Rotary Bull-Point Chisel BOSCO BP-40
Rotary Bull-Point Chisel BOSCO BP-40
14 * 260 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Bull-Point Chisel UNIOR 1514A2
Bull-Point Chisel UNIOR 1514A2
180 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Milling Collet Chuck Set Universal ER40 (11 pieces/set)
Milling Collet Chuck Set Universal ER40 (11 pieces/set)
Consist of
Cat. No
D
L
Range
Ordinary level
A level
AA level
Clamping Range
ER32
33
40
1.0
0.02
0.01
5 μ
3-22.2
ER40
41
46
4-26
Size
3*4 mm.
5*6 mm.
7*8 mm.
9*10 mm.
11*12 mm....
Center Drill MEXCO
Size
D1 ⌀ (mm.)
Size
D ⌀ (mm.)
Overall Length (mm.)
Pilot Length (mm.)
1.0
3.15
33.5
29.5
1.9
1.3
1.25
3.15
33.5
29.5
2.2
1.6
1.6
4.0
37.5
33.5
2.8
2.0
2.0
5.0
42.0
38.0
3.3
2.5
2.5
6.0
42.0
38.0
4.0
3.5
3.15
8.0
52.0
448.0
4.9
3.9
4.0
10.0
59.0
53.0
6.2
5.0...
HSS 4-Flute End Mill mm MEXCO
Size
D (mm.)
Size
S.D (mm.)
Size
C.L. (mm.)
Size
O.L. (mm.)
3.0
6.0
8.0
52.0
3.5
6.0
10.0
54.0
4.0
6.0
11.0
55.0
4.5
6.0
11.0
55.0
5.0
6.0
13.0
57.0
5.5
6.0
13.0
57.0
6.0
6.0
13.0
5...
HSS 4-Flute End Mill Inch MEXCO
Size
D ⌀ (Inch)
Diameter
S.D ⌀ (Inch)
Thread Length
C.L. (Inch)
Total Length
O.L. (Inch)
1/8"
1/4"
3/8"
1.7/8"
5/32"
1/4"
3/8"
1.7/8"
3/16"
1/4"
1/2"
2"
7/32"
1/4"
1/2"
2"
1/4"
1/4"
5/8"
2.1/8"
5/16"
3/8"
3/4"
2.1/2"
3/8"
3/8"
7/8"
2.5/8"
7/16"
1/2"
7/8"...
HSS Hand Reamer MEXCO
Size
D ⌀ (mm.)
Thread Length
C.L (mm.)
Total Length
O.L. (mm.)
Holder Size
S.D. (mm.)
3.0
30
62
2.2
3.5
35
70
3.0
4.0
38
75
3.0
4.5
40
80
3.5
5.0
45
85
4.0
5.5
45
92
4.5
6.0
45
92
4.5
6.5
50
100
5.0
7.0
53
105
5.0
7.5
54
107
5.5
8...
HSS Hole Saw for Mild Steel MEXCO
Size
16 mm.
19 mm.
20 mm.
22 mm.
25 mm.
28 mm.
30 mm.
32 mm.
35 mm.
38 mm.
42 mm.
45 mm.
48 mm.
51 mm.
55 mm.
80 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
HSS Hole Saw KUGEL
Size
19 mm.
20 mm.
30 mm.
32 mm.
38 mm.
42 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
HSS Hole Saw FUJI
Size
19 mm.
32 mm.
35 mm.
45 mm.
48 mm.
51 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Tungsten Carbide Tipped Stainless Hole Saw MEXCO
Size
16 mm.
19 mm.
20 mm.
21 mm.
22 mm.
25 mm.
26 mm.
28 mm.
32 mm.
35 mm.
38 mm.
45 mm.
48 mm.
50 mm.
51 mm.
55 mm.
60 mm.
67 mm.
76 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be chang...
Stainless Hole Saw MASTA
Size
16 mm.
19 mm.
20 mm.
21 mm.
22 mm.
25 mm.
26 mm.
28 mm.
32 mm.
35 mm.
38 mm.
45 mm.
48 mm.
50 mm.
51 mm.
55 mm.
60 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permi...
Stainless Hole Saw FUJI
Size
21 mm.
45 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Locking Installation Kit MaxCoy (2 pieces)
55 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Locking Installation Kit MaxCoy (3 pieces)
22 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Lock Installation Kit MACOH 777 (11 pieces)
7/8", 1", 1 1/2", 1 3/4", 2 1/8", 2 1/2"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Diamond Hole Saw MEXCO
Size
16 mm.
22 mm.
26 mm.
30 mm.
32 mm.
35 mm.
38 mm.
41 mm.
45 mm.
55 mm.
80 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Drill Press Spring for DP-5000G, SE-300E, SE-300G
Drill Press Spring
for DP-5000G, SE-300E, SE-300G
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Rivet Nut
Rivet Nut
M5*0.8
M6*1
M8*1.25
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Hexagon Split Point Drill Bit Phoenix
Hexagon Split Point Drill Bit Phoenix
2 mm.
2.2 mm.
2.5 mm.
3 mm.
3.2 mm.
3.5 mm.
4 mm.
4.2 mm.
4.5 mm.
5 mm.
5.5 mm.
6 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T...
Key Drill Chuck ROHM
Key Drill Chuck ROHM
Description #Model
For Drill
10T*4 mm. #S-1
1/4"
11T*6 mm. #S-14
3/8"
12T*6 mm. #S-2
3/8", 1/2"
12T*8 mm. #S-3
1/2", 5/8"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information c...
4 in 1 Heavy Duty Riveter KUGEL
4 in 1 Heavy Duty Riveter KUGEL
3.2 , 4 , 4.8 , 6.4 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Nut Riveter Set KUGEL
Nut Riveter Set KUGEL
M4 , M5, M6, M8 , M10
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Hammer Drill 1/2" Makita M8103B
Hammer Drill 1/2" Makita M8103B
Size 13mm.(1/2") power 430 W
Capacity Concrete: 13 mm., Steel: 13 mm., Wood: 18 mm.
Use for drill wood, metal, stone, concrete and plastic.
Power source for MAKITA M8103B
Must be use with Voltage 240 volts, and Use with Single-phase electric power.
This product is cover by Double Insulation, Can use...
Bench Drill Press 850W 1" REXON DP-430F MT3
Bench Drill Press 850W 1" REXON DP-430F MT3
Specification
Motor : 850 W
Drilling size : 19 mm.
12 Speed
Drilling power : 25 mm.
Tapered size : MT3xJT3
Stoke range : 82.5 mm.
Pole diameter Ø : 80 mm.
Plate size : 364x364 mm.
Base size : 518x279 mm.
Height : 1647 mm.
"If there are any additional...
Switch for Small Bench Drill Press KA3
Switch for Small Bench Drill Press KA3
10A AC 250V/380V
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Switch for Large Bench Drill Press DA7B
Switch for Large Bench Drill Press DA7B
10A AC 250V/380V
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Drill Machine Spring
Drill Machine Spring
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Drill Machine Spring T-16A and T-16A
Drill Machine Spring
For T-16A and T-16A
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Drill Machine Spring DP-330A
Drill Machine Spring
For DP-330A
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Drill Machine Spring DP-250A
Drill Machine Spring
For DP-250A
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Blind Rivet Warrior
Blind Rivet Warrior
Made from high quality Aluminium
Thin egde dome head
Many available sizes
Strong and Anti-rust
Use with Hand Riveters
Code
Diameter
Length (mm.)
Length (Inch)
4-1
3.2 mm. (1/8")
4.8
3/16"
4-2
3.2 mm. (1/8")
6.4
1/4"
4-3
3.2 mm. (1/8")
8.0
5/16"
4-4
3.2 mm. (1/8")
9.6
3/8...
Accordion Riveter TAIYO HR-50
Accordion Riveter TAIYO HR-50
Material
Rivet / Mandrel
Rivet Dia.
2.4 mm. (3/32")
3.2 mm. (1/8")
4.0 mm. (6/32")
4.8 mm. (3/16")
Aluminium/Alumi
x
x
x
〇
Aluminium/Steel
x
x
x
〇
Steel/Steel
x
x
x
〇
Stainless steel
x
x
x
x
"If there are any additional requesting produc...
Hand Riveter WINTON
Hand Riveter WINTON
For rivets: 2.4 mm. , 3.2 mm. , 4.0 mm. , 4.8 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Hand Riveter Lobster HR-002A
Hand Riveter Lobster HR-002A
It is a hand Riveter with general configuration.
Aluminum die cast frame and drop-forged chrome-vanadium steel lever handle
Wide, self-opening spring for regripping ease
Automatic mandrel ejection
Comes with four nosepieces to set rivets up to 3/16"
International design
Use Range : Փ 2.4...
Medium Duty Hand Riveter STANLEY STHT-69646-8
Medium Duty Hand Riveter STANLEY STHT-69646-8
All steel body with non-slip grip and wrench for changing nosepieces
Spring loaded handle ejects rivets stem
Versatile tool for joining sheet metal, fabric, leather, plastic parts, etc
1/8", 5/32", 3/16"
"If there are any additional requesting products, you can contact" Tel: 02-918-734...
Heavy Duty Hand Riveter STANLEY Pro STHT-69800-8
Heavy Duty Hand Riveter STANLEY Pro STHT-69800-8
All steel body with non-slip grip and wrench for changing nosepieces
Spring loaded handle ejects rivets stem
Versatile tool for joining sheet metal, fabric, leather, plastic parts, etc
3/16" (5 mm.)
5/32" (4 mm.)
1/8" (3 mm.)
3/32" (2 mm.)
"If there are any additional requesting p...
Pneumatic Riveter 3/16" PUMA AT-6315
Pneumatic Riveter 3/16" PUMA AT-6315
Capacity
3/16"
Stoke length
9/16" (14mm)
Air consumption
0.03 CFM (0.85 Litre/min.)
Pressure
90 psi , 6.5 kg/cm2
Weight
1.5 KG.
Overall length
273 mm.
Air inlet
1/4"
Suggested air compressor : 1 HP
"If there are any additional requesting product...
Bench Drill Press 5/8" REXON DP-330A
Bench Drill Press 5/8" REXON DP-330A
Specification
Bench drill size
5/8"
Weight
63 KG.
Drilling bit
16 mm.
Pole size
85 mm.
Plate size
274x274 mm.
Tapered size
MT2
Speed
12 Speed
Motor
600 W. / 220 V.
Height
1,000 mm.
Base size
463x274 mm.
"If there are any addition...
Bench Drill Press 850W 5/8" REXON DP-430F MT2
Bench Drill Press 850W 5/8" REXON DP-430F with motor
Specification
Weight
78 KG.
Drilling bit
16 mm.
Pole size
85 mm.
Plate size
364x364 mm.
Tapered size
MT2
Speed
12 Speed
Motor
850 W. / 220 V.
Height
1,648 mm.
Base size
530x272 mm.
"If there are any additional requestin...
Bench Drill Press 250W 1/2" TIGER T-13
Bench Drill Press 250W 1/2" TIGER T-13
Specification
Model : TDP-13
Capacity : 13 mm. (1/2") with motor
Power
250 W.
Drilling depth
50 mm.
Plate size
160x160 mm.
Base size
285x260 mm.
Pole size
50 mm.
Height
570 mm.
"If there are any additional requesting products, you can contac...
Bench Drill Press 375W 1/2" TIGER T-13H
Bench Drill Press 375W 1/2" TIGER T-13H
Specification
With motor
Power
375 W.
Drilling bit
13 mm.
Speed
5 Speed
Drilling depth
70 mm.
Base Size
330x210 mm.
Plate Size
196x200 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@...
Bench Drill Press 550W 5/8" TIGER T-16A
Bench Drill Press 550W 5/8" TIGER T-16A
Specification
Model : TDP-16A
Capacity : 16 mm (5/8")
Power
550 W.
Drilling depth
80 mm.
Plate Size
245x245 mm.
Base Size
395x290 mm.
Height
780 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email...
Bench Drill Press 550W 5/8" TIGER T-16B
Bench Drill Press 550W 5/8" TIGER T-16B
Specification
Model : TDP-16B
Capacity : 16 mm (5/8")
Power
550 W.
Drilling depth
80 mm.
Plate Size
285x285 mm.
Base Size
435x250 mm.
Height
820 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P....
Drill Stand HIKARI DS-400
Drill Stand HIKARI DS-400
Height: 400 mm.
Drilling Depth: 60 mm.
Diameter: 43 mm.
Materials: Metal and Plastic
Weight: 1.7 kg.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information...
Concrete Hole Saw KUGEL
โฮลซอเจาะคอนกรีต KUGEL
35 mm.
40 mm.
50 mm.
65 mm.
75 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
SDS Hole Saw KUGEL
โฮลซอเจาะคอนกรีต หัวเพชร KUGEL
25 * 165 mm.
38 * 165 mm.
50 * 165 mm.
63 * 165 mm.
76 * 165 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Concrete Hole Saw MEXCO
Concrete Hole Saw MEXCO
32 * 150 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Stroke Pneumatic Hammer UNIOR 1514
Model
Specification
1514 - 170
Length
170 mm.
Stroke Length
67 mm.
Round Shank Size
10 mm.
Impact Rate
3,000 RPM
Pressure
6.2 Bar
Air consumption
250 L/min
Air Inlet
1/4"
Internal Hose Size
8 mm.
Coulper
20 PM
1514 - 225
Length
225 mm.
Stroke Length
92 mm.
Round Shank S...
Chisel META
Size
1"*12"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Concrete Punch META
Size
5/32"*12"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Key Drill Chuck (10T) OKURA K
Key Drill Chuck (10T) OKURA K
Model , Description
For Drill
#K-32 10T*6.3 mm.
1/2"
#KK 10T*7 mm.
1/2"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Key Drill Chuck (11T) OKURA K
Key Drill Chuck (11T) OKURA K
Model , Description
For drill
#K-11 11T*4 mm.
1/4"
#K-3 11T*8 mm.
5/8"
#K-7 11T*5.5 mm.
3/8"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed witho...
Key Drill Chuck (12T) OKURA CK
Key Drill Chuck (12T) OKURA CK
#CK-3 12T*4 mm.
1/4"
#CK-4 12T*5.5 mm.
3/8"
#CK-5 12T*6.5 mm.
1/2"
#CK-6 12T*8 mm.
5/8"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be...
Key Drill Chuck MEXCO TW
Key Drill Chuck MEXCO TW
Description
For drill
12T*8 mm.
5/8"
12T*9.5 mm.
3/4"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Cordless Drill Driver 7 mm. BOSCH GSR 120-L
Technical Data
Cordless Drill / Driver
GSR 120-LI
Artical Number
3 601 JF7 0..
Rated Voltage
V
12
No-Load Speed
1st Gear
min-1
0 - 380
No-Load Speed
2nd Gear
min-1
0 - 1,300
Max. Torque for hard / soft screwdriving application according to ISO 5393
Nm
30 / 13*
Max. Drilling Dia.
St...
Rotary Drill 1/4" BOSCH GBM 320
Technical Data
Rotary Drill
GBM 320
Artical Number
3 601 AA4 5..
Rated Power Input
Watt
320
Output Power
Watt
160
No-Load Speed
min-1
0 - 4,200
Rated Speed
min-1
0 - 1,500
Speed Control
●
Right / Left Rotation
●
Chuck Clamping Range
mm.
0.5 - 6.5
Max. Drilling Dia.
Steel...
Rotary Drill 1/4" BOSCH GBM 6
Technical Data
Rotary Drill
GBM 6 Professional
Article Number
3 601 D72 0..
Rated Power Input
W
350
Output Power
W
136
No-Load Speed
min-1
4,000
Rated Speed
min-1
3,116
Rated Torque
Nm
12.3
Spindle Collar Dia.
mm.
43
Speed Control
-
Right / Left Rotation
-...
Impact Drill 3/8" BOSCH GSB 10 RE
Technical Data
Impact Drill
10 RE
Article Number
3 601 ...
B16 1..
Rated Power Input
W
500
Power Output
W
250
No-Load Speed
min-1
0-2,600
Max. Speed Under Load
min-1
1610
Impact Rate
min-1
25,700
Rated Torque
Nm
1.5
Speed Preselection
-
Right / Left Rotation
●
Spindle...
Impact Drill 1/2" BOSCH GSB 16 RE
Technical Data
Impact Drill
16 RE
Artical Number
3 601 ...
ฺB18 1..
B18 6..
Rated Power Input
W
701
Power Output
W
351
No-Load Speed
min-1
0 - 3,000
Max. Speed Under Load
min-1
1,640
Impact Rate
min-1
26,720
Rated Torque
Nm
2.0
Speed Preselection
●
Right /...
Impact Drill 1/2" BOSCH GSB 20-2
Impact Drill 1/2" BOSCH GSB 20-2
Impact Drill
20-2
Order Number
0 601 ...
184 0 ..
Rated Power
[W]
701*
Output Power
[W]
380*
Rated Speed
Right Rotation
1st Gear
[RPM]
650
2nd Gear
[RPM]
2,000
Left Rotation
1st Gear
[RPM]
-
2nd Gear
[RPM]
-
Impact R...
Rotary Hammer Drill 26 mm. BOSCH GBH 2-26 DFR
Technical Data
Rotary Hammer
2-26 DFR
Artical Number
0 611 ...
254 7..
Speed Control
●
Stop Rotation
●
Right / Left Rotation
●
Quick Change Chuck
●
Rated Power Input
W
800
Impact frequency at rated speed
min-1
0 - 4,000...
Rotary Hammer Drill 32 mm. BOSCH GBH 4-32 DFR
Technical Data
Rotary Hammer
GBH 4-32 DFR
Artical Number
3 611 C32 0..
3 611 C32 1..
Rated Power Input
W
900
Rated Speed
min-1
0-760
Impact Rate
min-1
0-3,600
Impact energy per stroke according to EPTA-Procedure 05/2009
J
5.0
Chisel Positions
12
Tool Holder
SDS-plus
Lubrication
Centra...
High Speed Drill 1/4" Makita 6501
Technical Specifications
Continuous Rating Input
230 W
Capacity Steel
6.5 mm (1/4")
Capacity Wood
9 mm (11/32")
No Load Speed (RPM)
4,500
Overall Length
206 mm (8-1/8")
Net Weight
0.9 KG (2.0 lbs)
Double Insulating
✓
Carbon brush No.
70
"If there are any additional requesting produc...
Electric Hand Drill 3/8" Makita 6413
Technical Specifications
Continuous Rating Input
450 W
Capacity Steel
10 mm (3/8")
Capacity Wood
25 mm (1")
No Load Speed (RPM)
0 - 3,400
Dimensions (LxWxH)
234mmx64mmx183mm (9-1/4"x2-1/2"x7-1/4")
Net Weight
1.3 KG (2.9 lbs)
Double Insulation
✓
Variable Speed
✓
Reversing
✓
Keyless Chuck...
Hammer Drill 5/8" Makita HP1630
Technical Specifications
Continuous Rating Input
710 W
Capacity Concrete
16 mm (5/8")
Capacity Steel
13 mm (1/2")
Capacity Wood
30 mm (1-3/16")
Impacts per minute (IPM)
0 - 48,000
No Load Speed (RPM)
0 - 3,200
Dimensions (LxWxH)
296mmx75mmx204mm (11-5/8"x2-15/16"x8")
Net Weight
2.1 KG (4.6 lbs)...
Hammer Drill 5/8" Makita 8416
Technical Specifications
Continous Rating Input
570 W
Capacity Concrete
16 mm (5/8")
Capacity Steel
13 mm (1/2")
Impacts per minute (IPM)
21,000
No Load Speed (RPM)
1,400
Overall Length
351 mm (13-3/4")
Net Weight
2.7 KG (6.0 lbs)
Carrying Case
✓
Carbon Brush No.
55
"If there...
2-Speed Hammer Drill 3/4" Makita HP2050
Technical Specifications
Continuous Rating Input
720 W
Capacity Concrete
20 mm (3/4")
Capacity_steel Hi
8 mm (5/16")
Capacity_steel Lo
13 mm (1/2")
Capacity_wood Hi
25 mm (1")
Capacity_wood Lo
40 mm (1-9/16")
Impacts per minute Hi (IPM)
0 - 58,000
Impacts per minute Lo (IPM)
0 - 24,000
No load...
Rotary Hammer Drill 24 mm. Makita HR2470F
Technical Specifications
Continuous Rating Input
780 W
Capacity Concrete
24 mm (15/16")
Capacity Steel
13 mm (1/2")
Capacity Wood
32 mm (1-1/4")
Impacts per minute (IPM)
0 - 4,500
No Load Speed (RPM)
0 - 1,100
Dimensions (LxWxH)
370mmx84mmx214mm (14-1/2"x3-5/16"x8-3/8")
Net Weight
2.9 KG (6.4 lbs)...
High Speed Drill 1/4" Maktec MT653
Technical Specification
Continuous Rating Input
230 W
Capacity Steel
6.5 mm (1/4")
Capacity Wood
9 mm (11/32")
No Load Speed (RPM)
0 - 4,500
Dimensions (LxWxH)
202x64x165 (8x2-1/2x6-1/2) mm
Net Weight
1 KG (2.2 lbs)
Power Supply Cord
2.0 m (6.6 ft)
Double Insulation
✓
Variable Speed
✓
Rev...
Electric Hand Drill 3/8" Makita M6001B
Technical Specifications
Continuous Rating Input
450 W
Capacity Steel
10 mm. (3/8")
Capacity Wood
25 mm. (1")
No Load Speed (RPM)
0 - 3,000
Dimensions (LxWxH)
229x64x175 (9x2-1/2x6-7/8) mm.
Net Weight
1.3 KG (2.8 lbs)
Power Supply Cord
2.0 m (6.6 ft)
"If there are any additional requestin...
Drill 1/4" STANLEY SDR3006
Specifications
Power Input (W)
3,000
No Load Speed (rpm)
0 - 4,500
Chuck Capacity (mm)
6.5
Max. Drilling Capacity (wood) (mm)
15
Max. Drilling Capacity (metal) (mm)
6.5
Cord length (m)
2
Max. Drilling Capacity (Steel) (mm)
6.5
"If there are any additional requesting products, you can cont...
Air Drill 1/2" PUMA AT-4041
Specification
Drill Size
1/2"
Speed
400 RPM
Length
180 mm.
Air consumption
8 CFM (226 Litre/Minute)
Pressure
90 PSI , 6.5 kg/cm2
Weight
1.82 KG.
Air Hose
1/4"
Air Hose Size
3/8"
Recommended air pump 2 HP and above
"If there are any additional requesting products, you can contac...
Bull-Point Chisel BOSCO
Bull-Point Chisel BOSCO
21 * 320 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Flat Chisel BOSCO
Flat Chisel BOSCO
17 * 280 mm.
Flat Chisel BOSCO
20 * 400 mm.
Flat Chisel BOSCO
21 * 320 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Rotary Bull-Point Chisel BOSCO BP-40
Rotary Bull-Point Chisel BOSCO BP-40
14 * 260 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Bull-Point Chisel UNIOR 1514A2
Bull-Point Chisel UNIOR 1514A2
180 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Milling Collet Chuck Set Universal ER40 (11 pieces/set)
Milling Collet Chuck Set Universal ER40 (11 pieces/set)
Consist of
Cat. No
D
L
Range
Ordinary level
A level
AA level
Clamping Range
ER32
33
40
1.0
0.02
0.01
5 μ
3-22.2
ER40
41
46
4-26
Size
3*4 mm.
5*6 mm.
7*8 mm.
9*10 mm.
11*12 mm....
Center Drill MEXCO
Size
D1 ⌀ (mm.)
Size
D ⌀ (mm.)
Overall Length (mm.)
Pilot Length (mm.)
1.0
3.15
33.5
29.5
1.9
1.3
1.25
3.15
33.5
29.5
2.2
1.6
1.6
4.0
37.5
33.5
2.8
2.0
2.0
5.0
42.0
38.0
3.3
2.5
2.5
6.0
42.0
38.0
4.0
3.5
3.15
8.0
52.0
448.0
4.9
3.9
4.0
10.0
59.0
53.0
6.2
5.0...
HSS 4-Flute End Mill mm MEXCO
Size
D (mm.)
Size
S.D (mm.)
Size
C.L. (mm.)
Size
O.L. (mm.)
3.0
6.0
8.0
52.0
3.5
6.0
10.0
54.0
4.0
6.0
11.0
55.0
4.5
6.0
11.0
55.0
5.0
6.0
13.0
57.0
5.5
6.0
13.0
57.0
6.0
6.0
13.0
5...
HSS 4-Flute End Mill Inch MEXCO
Size
D ⌀ (Inch)
Diameter
S.D ⌀ (Inch)
Thread Length
C.L. (Inch)
Total Length
O.L. (Inch)
1/8"
1/4"
3/8"
1.7/8"
5/32"
1/4"
3/8"
1.7/8"
3/16"
1/4"
1/2"
2"
7/32"
1/4"
1/2"
2"
1/4"
1/4"
5/8"
2.1/8"
5/16"
3/8"
3/4"
2.1/2"
3/8"
3/8"
7/8"
2.5/8"
7/16"
1/2"
7/8"...
HSS Hand Reamer MEXCO
Size
D ⌀ (mm.)
Thread Length
C.L (mm.)
Total Length
O.L. (mm.)
Holder Size
S.D. (mm.)
3.0
30
62
2.2
3.5
35
70
3.0
4.0
38
75
3.0
4.5
40
80
3.5
5.0
45
85
4.0
5.5
45
92
4.5
6.0
45
92
4.5
6.5
50
100
5.0
7.0
53
105
5.0
7.5
54
107
5.5
8...
HSS Hole Saw for Mild Steel MEXCO
Size
16 mm.
19 mm.
20 mm.
22 mm.
25 mm.
28 mm.
30 mm.
32 mm.
35 mm.
38 mm.
42 mm.
45 mm.
48 mm.
51 mm.
55 mm.
80 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
HSS Hole Saw KUGEL
Size
19 mm.
20 mm.
30 mm.
32 mm.
38 mm.
42 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
HSS Hole Saw FUJI
Size
19 mm.
32 mm.
35 mm.
45 mm.
48 mm.
51 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Tungsten Carbide Tipped Stainless Hole Saw MEXCO
Size
16 mm.
19 mm.
20 mm.
21 mm.
22 mm.
25 mm.
26 mm.
28 mm.
32 mm.
35 mm.
38 mm.
45 mm.
48 mm.
50 mm.
51 mm.
55 mm.
60 mm.
67 mm.
76 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be chang...
Stainless Hole Saw MASTA
Size
16 mm.
19 mm.
20 mm.
21 mm.
22 mm.
25 mm.
26 mm.
28 mm.
32 mm.
35 mm.
38 mm.
45 mm.
48 mm.
50 mm.
51 mm.
55 mm.
60 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permi...
Stainless Hole Saw FUJI
Size
21 mm.
45 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Locking Installation Kit MaxCoy (2 pieces)
55 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Locking Installation Kit MaxCoy (3 pieces)
22 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Lock Installation Kit MACOH 777 (11 pieces)
7/8", 1", 1 1/2", 1 3/4", 2 1/8", 2 1/2"
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"
Diamond Hole Saw MEXCO
Size
16 mm.
22 mm.
26 mm.
30 mm.
32 mm.
35 mm.
38 mm.
41 mm.
45 mm.
55 mm.
80 mm.
"If there are any additional requesting products, you can contact" Tel: 02-918-7343 Email: T.P.online01@gmail.com Line: @TPinter "Product information can be changed without permission"